I had an evening off worrying about the heart!!! Gave myself a treat and made these two little critters in rings. I'm just delighted with them. I shall make a few more in different colours and then go back to the heart.I had an evening off worrying about the heart!!! Gave myself a treat and made these two little critters in rings. I'm just delighted with them. I shall make a few more in different colours and then go back to the heart.

I've just pressed the wretched heart and look - it doesn't look too bad!!!! Mind, it doesn't fit the ring I'm making it for so it's GOT to be sorted. Think I'll have to take out a SR on each side and do some tweaking on stitch counts. Anyway, I've abandonned it for a few days. Meanwhile, I'm playing with fishes in rings. I'm wondering whether the bubbles will work? Do I need more?

Naming the Heart

I have a name for my heart - HATEFUL HEART. I hate it at the moment. Not sure if I'll continue with it. Look at it - have you ever seen ANYTHING so UGLY. Actually I usually get to this 'stage' in a design so I'm not going to worry too much about it. Think positive, Jane. Think positive. I LIKE the chains forming the outside. I LIKE the centre. I'm pretty sure of what I need to do next. I need to take out a SR at each side and re-tat again. Been a BAD day as my computer went terminal on me this morning and it's only thanks to a major 'kiss of life' from 'him wot must be obeyed' that it's now back and staggering along. I shan't even try to re-draw or re-tat this evening - I need joy in my life so I'll make something else!!!! Oh, woe is me!!!

Progress and Lack of Progress!

I had a good session on the heart yesterday as I started in the afternoon. Naughty tatting in the afternoons but the weather was abysmal!!

So first of all below are various 'scraps' due to mishaps, restarts and plain lack of concentration!!!

The piece I've tatted below is the first one I tried based on the drawing (also below). You can see that the actual tatting looks nothing like the drawing. Yesterday I thought that the piece 'bulged' too much at the sides so decided to do away with one SR on each side but when I was tatting the new version up I realised that this wouldn't work. I will have to add the SR's back in to today's drawing. I've also joined two SCMR's to SR's to add stability to the middle. The first tryout below doesn't look too far off! The problems with any alteration is that the text has to be constantly changed and the numbering of the rings too. If I didn't draw and re-draw, text and re-text then I'd get VERY lost!! The final tryout on the right is probably going to be the final 'start point' for the heart (longer chains at the top and a bit more 'tweaking'). I shall now use a 'decent' colour and thread and try playing with beads. Also need to re-draw this one today.

If you look very closely at the final one you will see that it must have been late in the evening. I obviously can't read my own instructions and missed two joins. These I tied in afterwards but they may well throw the whole design out of shape and I might find myself starting again from scratch. It has been known to happen many times in the past!!!

Later in the day and I've drawn up the new diagram to go with the text based on the last tryout above.

Next Stage

Yesterday I re-drew the heart in the ring - here it is.

I wasn't happy with the previous tryouts as the three SR's (8, 9 & 10) looked rather clumsy and forced me to use the split chain. You will see above that I have turned the SR6 into a SCMR to try and avoid this. All changed yet again when I started to tat this drawing! I made SR8 much smaller as shown in order to get a more defined 'dip' in the heart shape. After I'd worked the following chain out towards R9 I realised that this wasn't going to look very good so I undid that part and tried it again using a chain direct from the base SR5 and using a lock join to the two picots on SR6 & SR7. I carried on as it didn't look too bad!! Well, it didn't until I'd finished the whole thing!! I'm going to have to sort this bit out again tonight.

When I got to R10 I decided to try another SCMR instead of a ring. This has given me what I wanted - more 'bulk' at the top of the heart. By this time I decided it would be best to finiish off this tryout and take a look at it within the ring.

I put the heart in the ring tying it in the places I thought best. YIKES - horrid!! If you look carefully at the picture below you will see where I've tied it in AND tied 'suggested' additional joins to firm the whole thing up. Also you will see that the group of SR's (11, 12 & 13) and the chains before and after need to be 'sorted out'. I think I will probably have to 'get rid of' one of the SR's. So, what this means is that today I shall have to re-draw and alter the text accordingly to the whole pattern. Almost starting from scratch again.

Later the same day!!! I've now re-drawn the heart twice! If you take a look at the two drawings you'll see that I've removed two split rings down the sides and jiggled the top to add another two SCMR's. BUT having done the first one I realised that it would be a mess where the pattern meets in the dip. I tried to work the SR5 and then continue round the outside. When I got to the very end (back in the dip) I saw that it would be a mess!!! I then went back and re-drew this. Whilst drawing I always alter the text - using lots of question marks which remind me to check on the next tatting session!!! Next stage will be to test the last picture and the text together. I expect there will be other major alterations before this simple heart is finished.

New Year - New Design

Happy New Year and I'm off to a stuttering start tatting wise!!!! I'm going to show this design in all it's 'glory' from the very, very start to (with a bit of luck!) it's finish. Below is how I'm teaching myself to start a new pattern. In the past I've started with the picture of what I'm hoping to achieve and just tatted it but over the past year or two I'm gradually changing over to 'drawing' it on the computer first. So, picture number one is the ring with a 'standard' heart in it which I put together and placed on 'layer 2' of my drawing program (SerifDraw Plus).

The next step was to 'draw in' what I think might work on layer one (a bit like tracing). Now, while I'm doing this I think of how it will be achieved and in this case (at the moment) it will have two split chains between SR9 and SR11.

The third step was to turn on the telly, power up the laptop, get two shuttles filled with thread (and in THIS case I know it will have lots of SR's but will have to be worked in one colour) and start with the text. I type in the text as I go then at the end of the evening email it to myself to pick up on the main computer in the morning. I usually use two colours in the first few tryouts so that I can clearly see where I'm going but sometimes I stick to just one. In the picture below you can see that this heart isn't going to work out quite big enough for the ring. I also don't like the arrangement at the top left hand part. In the second drawing I did you will notice that I was trying to achieve a deeper 'dip' in the heart. So many that I've done and seen in the past don't (to my way of thinking) have a very clear outline. This is one of the things I'm hoping to achieve. Later today I shall take what I've done and look at it carefully and re-draw it. I'll add this later.