Pages

6 May 2017

Round 11 Renulek


Round 11 done and I THINK I've caught up!!!  Well I have, nearly as I've started on round 12 too.

I was a late starter which isn't surprising as I've only got three brain cells (BC1, BC2 and, of course, BC3). This round I decided needed to be a bit 'pinkish'!!!! 

I'm really struggling now with the colours to use. I'd like to finish with a strong blue colour on the last round. Least that's what I'm thinking now but we'll have to see what happens when I get into the wonderful box of very fine threads. It's such fun blending your own colours and I love the subtle changes I get too.

5 May 2017

Joining down picots


Well I did get the page done in the end. Where does time go? 


A page on how to join the down picot.

4 May 2017

More about the Clover shuttles

A few days ago I had Tatlyn's blog post appear on my blog roll and started to read what she had to say here. 

After a while I thought I was reading my own blog post back here!!!! I carried on reading when I realised that I'd found a soulmate over the Clover shuttles!!! 

As you know I did add more to my original post a few days later and that can be found here. Well I'm going to add more today as time and using these shuttles has caused BC3 to find more things out about them! 

It occurred to me when I was working with sewing threads (HWT) a few days ago that I wasn't having any problems with the threads occasionally 'catching' on 'nubs' of plastic as I normally do with the Aero/Aerlit shuttles. These 'nubs' are often found on the bobbins. Looking again at the bobbins - the Clover ones are more substantial in feel and very smooth - just like the shuttle itself.

I'm a 'bobbin with a hook' kind of girl and the most 'off putting' thing about the  post Clover was not having a hook but I've quickly adjusted to that and find joining with the lovely fine pick just as easy although trying to join to very small picots still needs a fine 0.4mm crochet hook!

Just read a comment from Kathy on my blog post of the other day and I love her idea of 'rolling' the shuttle to wind or re-wind the bobbin.  Here's her comment
"I never remove the bobbin from the shuttle! I merely tie a slipknot around the bobbin (I use the shuttle itself to do this), and wind the thread onto the bobbin by rolling the bobbin (still inside the shuttle) on a soft but not smooth surface, like the opposite side of a mouse pad (which gives it traction). I also retract my thread when tatting by also rolling the bobbin on the mouse pad. It means that I have to have the mouse pad close by when tatting. At home I always have my tatting box on my lap, and the pad is on top of the box, giving the pad a hard surface to sit on. Rolling the bobbin has helped me prevent carpal tunnel!"


3 May 2017

Naming and shaming


When is a core thread NOT a core thread and what is one anyway?

This is a question that I keep asking myself. There's an easy answer when making a chain as the core thread is simply easy to see!!!
I've always wondered what the answer is when it comes to a ring, though. Or a split ring for that matter. What SHOULD we call that core thread which really is also the 'working' thread too? 

This only came to light when I started on another technique page following on from yesterday's which will be about joining drop picots. In the end I resorted to a slightly long winded way of describing it which I will get finished and on my site tomorrow or the next day - with a bit of luck and the wind blowing in the right direction!!!!

2 May 2017

The down picot


The down (and out?) picot is such a useful thing. I've used various ways of doing this picot over the years and find it especially useful for animals - mainly for placing their eyes.

Many moons ago I used to use a PC but gave up and moved over to a Mac some 8 - 10 years ago. Whilst on a PC I used a software package for drawing which I got on with reasonably well but it wasn't going to be compatible with a Mac as for some reason the company didn't do a version for IOS. So, that meant a whole new learning curve. Not only on how to use an iMac but also on how to use the drawing package I eventually bought. I downloaded several pieces of software which allowed me to use them on trial for a while. I finally decided on EazyDraw and have had NO regrets on either changes. Now, why am I telling you this? Simply because a few of my pages still have the drawings on that I did in the PC package and I'm slowly replacing them with ones done with EazyDraw. 

Last week sometime I was talking to a tatting friend about the down picot so went to look at my page and realised it needed updating. So, here it is.




1 May 2017

This was fast!


Compared to the last round this one was like an express train!!!!

I forgot to mention before that the two (or, rather, four) colours I used on the last round were a green variegated and a plain green (for the rings) and a deep purple and black for the chains. It gave such a strong look that this time I thought I'd better break things up with something a bit 'milder'!!!

No idea what I'm going to use for the next round (11) but I'm sure it will also be a quick round to work up. Keep watching this space!!!