Pages

12 December 2009

To lock or not to lock - that is the question!!

Interesting question here!!!


I was reading this blog yesterday and it got the old brain cell out of hibernation!!!  Thanks, Rose Anne for permission to link, much appreciated (it woke up number 3)!!!


I looked at her little practice piece (that's the second picture down) after admiring her first designs.  First thing that I noticed was that she'd tied a knot to start.  Exactly what I'd have done in that situation because I'd be wanting to get to the real issue which was the false picot.  


I then (because of the knot and where brain cell number 3 was going) got to thinking about the magic thread trick and why I've never used it (well, I did once and the ends came straight out!).  So here is my 'how to' for starting off a ring without tying a knot or using the MTT (although actually the following is an MTT without the hassle of extra bits of thread or wire or flossers).


I tuck the small end round my core thread and TOTT (tat over the tail).  Here's what it looks like before the ring has been closed (left).  Hang on, I've got a drawing that I've done for the next TIAS.  I'll pop that in here too (that's the one on the right!).
  


Now, 'what if' (like Rose Anne) you have a split ring next with a 'false picot' in between the two.  There are several ways of dealing with this but this works best for me.


In the scan below I have started the ring exactly the same way as above by TOTT - but this time I have laid the second colour alongside and behind the original small tail leaving another end to tat over.  This doesn't make the ring noticeably thicker.  Well, I don't think it does!!!  


A handy 'hint' here if you're clumsy like me is to put a paperclip on the second end's tail to stop you accidentally pulling it back out!!!  How and why did I learn that trick?  Guess - I did pull the end out several times!!!


So the ring is worked over both tails and closed.  If you look at the scan below you'll be able to see the gold end 'peaking out' where it finished.  Normally I'd make sure the end was left at the back and it would stay there until I'd finished the whole piece.  I'd then give it an extra tug before snipping so that it would slacken off and wiggle back into the work.  Please note that I was using 'rat's tail cord' for this demonstration - not easy to work with!!!


Now, if you need to leave a false picot in between the ring and the next split ring it is currently being advised that folks should do a lock stitch (tie a knot).  I'm going to throw a spanner in the works here and say - please don't!!!  It will make an ugly place in the tatting.  All you need to do is leave a space of bare thread and start the first side of the split ring.  See next scan.

When the first side of the SR has been finished - leave another small space and make the second side of the split ring as normal!!!  Again take  a peak at the scan below (left).  Viola - no need to do a lock stitch!!!  


The scan on the right shows the same thing but with the lock stitch in between.  I rest my case and will put brain cell number 3 back into hibernation!!!!


Oh, before he goes I may show a way of avoiding the lock stitch if a chain is going to be worked after a ring or SR.  Does anybody want to see this?
   

11 December 2009

Yet again!


I saw Sally's post the other day with all her butterflies on and decided to try using my 'mixed up' beads too!!!


Here's just one butterfly worked with those.  Under that one is another using the Lizbeth Jellybean thread.


I really must settle down and do something new but time is racing by and I've a lot of other stuff going on at the moment which means I have to sort those out rather than the new TIAS!!!  When I get an hour or two I do settle down to that but finding the time is a real problem.


Anyway, enough wingeing from me - it ain't my style!!!  Can't stand hearing myself moan so I'm sure others can't either!!!

     

10 December 2009

More butterflies!!!!

Of course yesterday's pattern doesn't have to be used for a bookmark!!!  Even I've worked that out!!!

Here are a few made with some thread which has been in my stash for ages.  I've no idea what it is but it's worked out at about a size fifty, I guess. 

I've no idea what I'm going to do with these wee bugs but I'm sure they'll find themselves being used for something soon enough!!!



9 December 2009

A butterfly!


I know that everybody's thinking and tatting for the holiday season but you know me - I have to be a tad different!!!!  I have a problem.  A BIG problem.  A HUGE problem.  A MEGGA problem.  I'll tell you what it is!!!


When I have an idea and have fiddled and messed with it and it finally becomes a pattern I have NO patience.  I can't keep it for months or weeks or even days!!!  I HAVE to share it.  If I could keep it then I'd be able to launch things like this at the right time of the year but ...........


The reason for altering the Funny Face and making this little butterfly (into bookmarks) is for a reason which I'll share in late January.  A very good reason, I think!!!


I did share the pattern with Sally and (like me!) she can't stop making them so in order to stop us both from our addiction I've added the pattern to my site this morning.  


The picture below shows the pattern worked with a pearl tatted 'tail' instead of the lock chain on the written pattern.  I used this method (the lazy way!!) to make this.



8 December 2009

Another Snowsettia from 'foreign parts'

Now I've known Elizabeth who made this version of the Snowsettia for years. She pops into my inbox from time to time and always with a smile.




She sent me her version of the Snowsettia for me to share. Thanks Elizabeth from Mobile, Alabama.

7 December 2009

Reporting in!!!


Sorry I missed my blogging yesterday - put it down to a 'long lie in' in bed!!!  Saturday was great.  I got into the overflow car park just before it 'overflowed' itself.  I got there about half an hour after the fair opened.  YIKES.

The venue is lovely.  Modern, spacious etc.  All the usual UK suppliers were there with ample supplies and loadsa lovely threads and beads.

Now, for those who wanted to see what I bought - you're going to be dissapointed, I'm afraid.  I came home with - waaaaiiiit for it!!!!  Two balls of black number 80 thread (one for me and one for Sally), a number 40 in black for Sally, and a ball of Lizbeth variegated.  That's all, I'm afraid!!!!  I came home with so much 'stuff' from my trip to the USA that I really didn't need anything else!!!  


I saw my friends from the Ring of Tatters who had a splendid 'pitch' decorated with all their Christmas tatting.  BOY, were they busy.  I had the wonderful pleasure of meeting a lady who's sent me nearly (or more than) 1,000 motifs for the bookmarks over the years - that was a great experience.  


Most people who go to the event appear to be bobbin lacers but there was a terrific interest in tatting too.  I saw Jennifer, Jean, Lynne and Ruth (on the ROT pitch) sell loads of the DVD's which can also be found here.  HECK, you didn't expect to read a blog post without an advert for the ROT, did you?!?!?!?


Oh, I spotted Rosemarie Peel at one point when I was busy talking to somebody else but didn't bump into her to speak to - bummer.  I think Pam Palmer was there from what rumour said.  Again I didn't see her to speak to.  It was very busy there as usual!!!


Yesterday (most of the day) was spent chopping up the TIAS pattern into bits and starting in on the extra drawings and explanations.  Kept me quiet for hours!!!