More pretties

Mystery solved

Thanks a million to Karey Solomon who says she's got the Tatbeads. I knew they'd got their passports!!! I'm rather relieved they're off my hands for a while as they are SUCH a handful. They mentioned that they wanted to go to the Hector tatting convention but I said they were too small to travel alone and as I wasn't able to go then they had to stay home. I found the ladder outside the window leant against the wall so I presume that's the way they sneaked out. I hope they've saved up enough money for their fare home - I'm not sending them any!!!! Karey, if you have any problems with them threaten them with the scissors!!!!!

New arrival in Tatland

Elaine Law sent a picture of a frog she'd made to go in the Tatbead family's garden so please take a look. Click on the title to take you directly to the tatbead's extended family!!
Oh, there's another mystery here. They all came with me to the Ring of Tatter's stand at the NEC a couple of weeks ago. They came home and were last seen 'lurking' in the middle room. I then realised after a few days that they were no longer there. They've been missing now for a week. I did hear a rumour that they were last seen heading towards Heathrow airport. I can't find their passports either so I''m getting a bit concerned. If ANYBODY knows anything about their whereabouts would they please let me know. I would be grateful of any sightings or any thoughts on where they could be.

Another attempt

I finally got the brain working on this one again. I started at the head which is an extra SR and meant altering the text completely throughout! Then I took out a ring and chain on both the upper wings. I've yet to put this in a ring but I'm much happier with it now.

Also listed more shuttles on ebay yesterday and was also told this morning that I could 'let the cat out of the bag' that I've been chosen to teach at the Palmetto Tat Days - yippeeeeee!!! http://www.palmettotatters.org/events/TatDays2007/TATDAYS2007.shtml

Later in the day and I've got the same butterfly in it's ring. Rarely do I get things finished within 24 hours of starting. I've usually 'mislaid' them in between times!!!

Butterflies in rings

Towards the end of last week I made two more butterflies (below). As I wasn't concentrating on the larger one I made a bit of a mistake. Looking at it I realise that the result is a much better upper wing so I did the other to match!!! I now have to re-write and re-draw the pattern again!!! Serves me right - shouldn't try and tackle this when I'm tired!!!

Thoughts on Tatting

I’ve been pondering about the following over the past few years and am offering this as my personal opinion on these subjects.

Copyright issues - Designs and Techniques.

I feel there are three intermingled issues here. I have been directly affected myself by all of the following and would like to make it clear to all who are interested in how I feel about them.

I get very upset if a pattern of mine is taken and reproduced with only slight alterations and then published as somebody else’s with their name as the ‘designer’. I think this is fair comment considering the amount of time that’s put into each design produced.

If somebody takes a design of mine which is very innovative, alters it and again calls it their own without then telling people where they originally found their inspiration then that puts them in my view in the realms of a deceiver. Not only of others, but also of themselves.

NOW, if somebody comes along and says ‘why don’t you’ do this, that or the other to a design and is prepared to do it themselves and acknowledge me as the inspiration or source then that is fine and also very flattering. In fact this is particularly good if I can add an alteration or improvement to my website thus keeping all the ‘progressions’ together in one place.

Techniques are a whole different issue. Techniques as we all know are not copyrightable but can be patented at vast expense. It is possible I may have invented one technique. My concern with this is that to my knowledge nobody has used it!! I would HATE to think that people believe that they can’t use it because it’s mine. NO IT’S NOT and I don’t want recognition for it either. I would just love it to be used, abused and developed. I could then quietly sit here and think to myself ‘hey, I did that and people are finding it useful’. That’s all I want. There are at present a lot of ‘new’ developments out on the Internet that I just dare not use because they ‘belong’ to somebody. OK, I can use them but only if I put ‘their’ name on each pattern that I use ‘their’ technique in but if I did that for one then I’d have to do it for all the techniques in a pattern and what a lot of ink and paper THAT would waste (let alone the additional time and research involved!) As there is some dispute over ‘who invented what and when’ over some of these ideas then I’m not prepared to risk putting my big foot in it by accrediting the ‘wrong person’. I truly admire those who come up with these new ideas but – what is the point if people are frightened to use them?

On another issue and finally – making money from our pieces of tatting! Hmmmm, if it could be done then where is our first millionaire tatter? I like to know if somebody wants to use my work to make things to sell. I love it to be for charity but basically I’m just nosy!!! I feel that the type of people who buy pieces may then become interested in making some themselves. I also feel that this can only promote our craft. The only thing which makes me very cross is that non tatters don’t appreciate the full value and are not prepared to pay as such for our time, skill and efforts!!! Still, they never will so there’s nothing we can do except put as high a price on a piece that we can realistically expect.

The above is purely my own opinion based on my life on this planet. If it offends anybody then I apologise but I felt I had to make my feelings clear in the ‘tat world’. I am here purely to promote the ART of tatting in as friendly a way as possible. I don’t want fame or glory – after all tatting is such a small part of the whole of the scheme of things. I’m off. Tat’s all I have to say for now.

Whooopppeeee!

Look who's arrived in Tatland - the Easter bunny along with a basket full of eggs!!! Click on the title to find the link.
I was going to add two more butterflies today but they can wait now!!! This arrival is MUCH and FAR too important to miss. Thanks again, Martha.

Nothing done!

I didn't get anything finished the last two evenings. Not been feeling too good and some worrying news didn't help! BUT I did get round to listing some more Aero shuttles on ebay. http://search.ebay.co.uk/_W0QQsassZjaneeborall
Just hope that I feel well enough today to be able to get to the NEC tomorrow with the Ring of Tatters. That annual trip is my 'treat' of the year!! I love helping to demonstrate there. Busy but fun.

Pair of Butterflies

Yesterday I started on a series of 'giveaways' for family in America. These are the first two! A pair of butterflies.

Relaxing tatting

I'm taking time out to re-tat several of my patterns to check for mistakes and also to make other 'bits and pieces'. Last night it was a return to one of my favourite little pattern books - New Critters on the Block by Martha Ess. My middle grandson will be four next week and he's 'into' dinosaurs (well, his grandma's one, isn't she?) so I made these two guys for his birthday card. I used a number 20 Flora HH (variegated) which I didn't know I had. It's lovely and a doddle to work with.

Finished - I think!

I finished off the lilac butterfly from two days ago - miracles do happen!! I used my favourite invisible thread and added beads to the feelers.
I then went back to adding beads to the very long picots which is the second butterfly but I wasn't happy with this either.

The final pink one is my favourite. One less bead on each long picot and that seems to have done the trick.
All I have to do is finish off the drawing, put it all together and it's done! Another one off my list of 'to do's'!!! The hardest part of this design was getting it into my head that the rings were facing outwards and the chains inwards. Don't know why but I just couldn't get it going at first. I struggled with the instructions just after the fourth SR where a chain takes the worker to the lower left wing. This I did about six times just so I could get the SS or RW or whatever right! Just hope it is now!!!

Looking a bit better!

Well a few ds here and there and another way of adding beads and it's looking a lot better. This evening (IF I stay awake) I shall try the very long picots again with the beads on. It's amazing the difference a day makes!!! I have tied this into the ring temporarily and would add beads to the feelers too.

Not so good!!!

I had to virtually re-write the whole pattern yesterday evening after Sue and I had discussed how to do it in one 'hit' and two colours!!! This meant starting in a totally different place and working in the opposite direction and then having to re-do one of the top wings again as they are not symetrical!!! Hey, ho, finally got to the end (this time the butt end!!). I added beads to the long picots BUT will re-tat again with fewer beads (i.e. one bead instead of Vlp's with beads on). Still quite a few issues so that it lies flatter but this may have more to do with the abundance of beads than the actual pattern. Yesterday's with the 'scraggy' looking picots did at least lie flat and the stitch count was exactly the same. I need to look again at some of the chains towards the tips of the wings (they could probably do with an extra ds here and there) and also the head which tends to 'hide' behind the two top wings. The two rings at the base of the lower wings also need to be joined, I feel. I need to stay focussed on this pattern instead of wandering off onto something else. I have a deadline - self imposed - but a deadline nonetheless!!!!

Goody, goody, goody!

After the hassle of the heart in the ring I nearly gave up trying to do anything more with rings. BUT as I'd bought so many from Claire's sale just after Christmas I started to feel a little guilty. I nearly fell off my chair last night when I finished another tryout and found that it FITTED the ring. Least it's pretty good for a first 'real' attempt!!! Next stage is to work out the lengths of the long picots and as Sue Hanson has already guessed - find out how many beads fit onto them. I think I'll only need 2 beads on one of the shuttles (for the ends of the top wings which are SCMR's). My only disappointment is that I can't work it in two colours without doing it in three parts. Still I'd rather do it in one hit and one colour with no ends to tie in!!!!!

Another project started

I'm off again!!! Remember the butterfly that I amended and made to fit into a ring? Weellllllll I decided I 'neeed' another one to sort of 'match' but which would fit in a larger ring. I wanted it to be different too.

Here's my first and second attempts. The scraggy looking picots will eventually be 'refined' and will hold beads so that the whole thing should be surrounded by beads. The body is NOT right but I had a brainwave in the night and will try a block tatted centre this evening. Next stage will be to 'trace' over the second picture in my drawing program and then 'play' with it to see if I can do something with the body without tatting it. This also gives me an insight into different ideas. I would like to make the top wings a little more 'shapely' too.

Later in the day and I've been 'playing' with this design on the computer. I've also asked 'me old mucker, Sue Hanson, to check to see if she's seen a butterfly like this might look before!!! I'd hate to upset anybody over copyright issues. Been done to me and I don't want to do it to anybody else!!!
As a lot of people will know I use Serif DrawPlus for doing my drawings (along with a Wacom graphics pad). The way I normally work is by finding an image from the internet through searching Google images. I find a definitive picture to study and usually paste this onto a lower 'layer' of my file in Serif. This is then made transparent by 50% so that I can go back to the layer above and make a guess at how I would tat it - i.e. starting places, progression, techniques etc. First efforts are rarely any good but in the case of this butterfly I did quite well. I then tat this piece (guessing at numbers of ds etc) and scan it (see above). This again goes onto the lower layer in Serif and is made transparent. I can then 'draw' over it. This should be named the 'guestimate' stage!! Below you will see the result. I have added some more ideas to it which I now want to work on - one suggested by Sue. This is where life gets more complicated as this will throw out all the numbering on the text that I've already written in Word!!!! I've omitted the possible picots as I need a clear idea of where I need to join rings etc. I'm hoping that this will allow me to use two colours which is always difficult when working a piece in 'one hit'. Hopefully only one lot of ends to finish off too.
Hey, what's an old lady gonna do on a bitterly cold day in the UK?!?!? Tat and dream of butterflies!!!

Another ring and now I don't know which is my favourite!! I've given one or two away so will have to replace them!! I want/need one to match every colour tshirt I own!! I also do the same with earrings and bracelets so actually getting all the bling on in the morning takes longer than getting the shopping!!!! Such a hard life!!!!

Nearly finished

I have nearly finished putting together the meercat page, the finger ring page, a page to say how to make the braid for the ring, a page on a 'no hassle' way of block tatting, Heather's snowman and finally Heather's spinnaker tower!!!! Been a long few days plus learning new software. I could have stuck to the old software but I DO love a challenge!!!
Here's another finger ring - my favourite so far although I am making one in a variegated purply, maroon thread!!!
Right, I'm off to finish the pages and then list some more Aero shuttles.

The final version

Here he/she is finally finished. I tweaked the face slightly, fought with the lower limbs and did the drawings yesterday afternoon. All I have to do now is put the page together.

I want to finish another piece which needs another evening or two's concentrated tatting and then I'll have two patterns to put on my pattern page. I'm trying not to get tempted away to another idea which is brewing until these two are completely off my hands!!!!

Drum roll, please!

Finally I have a good version of the MEERCAT!!! There - the cat's out of the bag!!! Sorry, nearly bad pun there!!! This is NOT the quite final version as I may elongate the legs slightly although they do 'match' the picture I printed out and have been following. The cut picots are the claws which these funny little creatures have. I've a few tweakings to do to the face too.
I'm also working on a 'how to block tat without changing shuttles' instruction sheet too. I used this method for making the meercat BUT I'm sure the traditional way would work too.
Here's a url to the Oakland Zoo's information on meercats. http://www.oaklandzoo.org/atoz/azmeerkat.html and there are lots of pictures if you use google images.

Oh, I've also listed some more Aero shuttles on ebay too!!

Another teaser

Just finished ebaying some more shuttles and bits and pieces of tatting so I decided to MAKE myself get back to the mystery animal.

This one has been a real pain! I've almost thrown it out of the window on numerous occasions. I've spent most evenings this week 'fiddling' with it!! The main problem now is just the length of the legs - the ones at the bottom of this scan. There is only one showing here and that's too long!!! I've re-written the text to shorten it and have changed the method of working it quite a bit too. The second leg which you can just see started behind it is coming out at the wrong angle so again this needs to be rectified. I've tried the head once and that wasn't too bad but have since re-drawn it. There's no way this creature can be worked, I feel, without cutting and tying after the second lower leg.

I think I've nearly got the back legs right at last!!! I'll 'tweak' them on the next one to make them a little better. This animal has claws which is what the cut picots at the end of the feet represent. Hey, ho, off to attack the face now!! Hopefully when this is done the guesswork and teasing will be over. Just below is the latest attempt done this afternoon.