Geckos on a Jacket!

Here they are all crawling over my jacket. The front shows the sleeves as well. I think I need one more for the lower right side.

Here's the back view!

Woweeeee

I have just GOT to brag about this fantastic gift which Teri Dusenbury (http://theloversknot.blogspot.com/) sent to me. Not only is it so beautiful but it matches my new skirt and top which I bought last week for the Palmetto Tat Days. I can't tell you or show you how pretty it is. It sparkles and glitters incredibly. I'll try taking a photo later too and hope that it will show up better. Also she sent me a 'goodie' box with some of the thread which she uses to make her turtles. There were beads, bits and bobs and everything anyone could want to cheer them up during a particularly bad patch. Thank you Teri from the bottom of my heart.

The LAST!!

This is the last and another of the tiny ones. The two worked in no. 80 will be sewn onto the collar of the jacket - chasing each other across my neck. I'll show you when they're all sewn on. Tat's the next job - sewing the darn things on!!!

A baby gecko

This one is worked in a variegated green number 80 and works out to be just under 3 3/4" in length. I'm going to HAVE to work another to 'match'. Wonder if I've got another variegated colour in a number 80? Anything to keep my mind off having a tooth out later this morning!!!

These are the last two - or are they?

I told myself these would be the last two but then I wondered what they would look like in a number 80 so I may well make one or two more tonight!!

Two more

These little geckos get faster and faster to make so yesterday I managed to finish one I'd started on Friday and another whole one!! Still worked in no. 40 thread.
I also managed to get some buttons for the jacket - each one a different bright colour. They've EVEN been sewn on!! The sleeves have also been altered. I cut off the cuffs (the sleeves were 5" too long) and slimmed them down considerably. Next job is to decide where the geckos go and to sew them on!!!
You will notice that the orange and yellow one is facing the other way. I did this by 'reversing' my stitch order throughout. Needed a lot of concentration to do this but well worth the effort and MUCH easier than writing a whole new pattern out!!!

Another for the collection!

Now this one I really like. OK perhaps not true gecko colours but now I know that they're going on a dark denim base then I want colours that show up!!!!
I'm going to replace the buttons on the jacket with bright ones. Each one a different colour - I hope!!!

They just keep arriving!!!

Yesterday I found a denim shirt style jacket/cardigan that I'd forgotten I'd got!! It's a lovely soft denim but unfortunately one of the buttons has broken (not very nice buttons either) and the sleeves are far too long which is why I probably stopped wearing it!!! Anyway, It occurred to me that if I replace the buttons and shorten/alter the sleeves it might be ideal for traveling in. I do like to be comfortable when traveling!!! Then, as I tatted yet another gecko, I thought - why not sew geckos onto it!!!! So, tat's what I'm going to do. The speed at which these tat up makes it a viable project. One an evening. I shall sew one on each sleeve, one on each side at the front and probably three on the back. I MAY even tackle a couple of teeny tiny ones for the collar in a no. 80 but I'll decide that when I get to it!!

Anyway, here's yesterday evening's rendition - this time in a no. 20 instead of the usual no. 40!!

And Yet Another!

I did another gecko last night whilst babysitting. I used two colours, beads and lots of SLT's!!! Here's the result!!

I also found a 'better' way to do the head but still need to double check which shuttle the eye beads need to be on!! Really enjoying doing geckos so may well do another AFTER the one I started late last night!!! I may even do more to sew onto a denim casual jacket that I found lurking in the wardrobe!!!!
Oh, two very interesting points. Firstly this is a 'slap and zap' design. By that I mean you slap it on the ironing board and zap it with the iron. No blocking or anything. Secondly you'll see that in this latest version the 'toes' are nicely rounded. How DID I do that? Well I reverted to normal and to instinct (to be honest I forgot to take a picot gauge with me when I went next door to baby sit) and just 'eyeballed' each picot. I did this for nearly fifty years before deciding that I 'ought' to use one. I won't be using gauges again in a hurry!!!

Another Darn Gecko!!

This is my final version of the gecko. Hopefully!!!
I've re-designed the face. In this version I've added beads to the centres of the SR's using Tonya's method - http://tinyurl.com/34c4c7 and stuck to just one colour. The next one will be two colours plus beads!!!
I've actually got to the stage of enjoying this pattern and it doesn't take tooooo long to make - perhaps an evening without changing the text as you go!!!
Once the body's done it's mainly chains. I used that 'new' way that Julie Patterson and I independently came up with of doing the block tatting (the lazy person's way to block tat!). Here's a link to that too http://tinyurl.com/3yefre

Birthday Card & MORE Gecko problems!!!

Here's the birthday card I've made for my next door neighbour. It's actually much prettier than the scan shows as the seahorse is done in VERY bright colours. I'm also going to be babysitting her two boys on her birthday which is tomorrow. I love sitting for them as they're such smashing kids.

Yesterday evening I decided to 'bead' the gecko. I used Tonya's method of adding beads to the centre of the SR's see the link below. http://janeeborall.freeservers.com/tonyabeadsr.htm I've just realised that somewhere and somehow the link to her idea is missing off my home page. SORRY Tonya - I'll put that right later (after breakfast).
I also wanted to put beads in the centres of the rings but that looked absolutely dreadful. See first picture! What a MESS!!

I started again and just put beads into the SR's and it's looking a lot better. Stopped at ten o'clock and just before reaching the head as I want a clear brain to sort that out!!!

Another Gecko!

Spent ages yesterday afternoon sorting out ebay (see last post) and then I finished the birthday card but still have to 'put it together'.
I went back to the gecko again in the evening and the new one is worked in a plain bright green with a variegated rusty/brown colour. I used lots and lots of SLT's to make it. Still not happy about the nose but I think I've another idea for that - will try it out later today!!!

This evening I am going to see if beads will look good in a plain coloured gecko. I've got the most outrageous bright turquoise blue and green in no. 40 Olympus with the brightest pink beads. Hmmmmm, wonder if tat'll work!!! We'll see!!!!

Just when you thought you'd got it sussed!!

Nothing about tatting today except to say that the birthday card I'm working on should be finished this afternoon.
No, what I really wanted to mumble and mutter about was ebay!!!! As you know I do like listing stuff and have got it down to a 'fine art'. I work everything out in a text document and then when it comes to listing all I have to do is 'copy' and 'paste' into the relevant 'bits'!! Easy. So me and my big mouth offered to sell a friend's motorbike headlamp set! No probs, says Jane to Dave and Doreen - I'll do that for you!!!
Hmmmm, well ebay pulled a flanker on me and changed it's format!!! That really screwed me up for a while. Still I finally got the old brain round it all and listed the headlamp. Actually it's now easier to list and much 'prettier' too.
OH, I also listed some more Aero shuttles, a lovely Teneriffe lace book and some more tat bits!!!!

Progress or lack of!!!

Well I decided that last night it was time to tackle the problem of the gecko's head/nose!!!
I tried an idea out which you might not be able to follow by looking at the picture below. I'm pretty sure though that it's going to work out just fine. I think another couple of ds on the nose ring should be the answer.

Then I wanted to start a 'final' gecko with the 'new and improved' head. Hmmmmm, remind me NOT to drink red wine after a very busy day!!! I actually - now wait for this - I actually - hold tight - I really, honestly did some housework in the morning. There, I've said the dreaded word!!! Below is where I got to before I fell asleep in the chair!!!! You can see that I'm trying it out with two colours (one is a variegated rust to red/brown) and lots and lots of SLT's thrown in. I think this is going to be a really cool gecko!!!

Yesterday's Gecko

Yesterday's gecko now has eyes!! Not quite the right shape for the nose according to my 'gecko guru' - Pamela so I'll get back to working on that another day!!! I agree with her too the face and nose isn't quite right. Why is it always such 'silly' little details that are the making or breaking of the final piece? I struggled and struggled with the Palmetto frog as I just couldn't get the face right on that too. Other patterns just 'fall' into place.
I'm working on a 'top secret' project at the moment and can't allow myself to share it yet. One day I will but it's really, really top secret! It's going to be SO hard not to share.

Another gecko

I had a visit from another tatter on Saturday who happened to be staying in our town. She gave me this little gecko or alligator made of beads. Isn't he cute? Measures just under 3 1/2" from the tip of his nose to the end of his tail.
She also showed me the tatting she was working on and amongst her pieces were several seahorses. She told me that she knew the pattern by heart as she'd got it from My Weekly a few years ago. I said I knew it too - it was my design!! She was very surprised!!!!

What is the difference - later in the day!

I thought it was worth copying and pasting Pamela's comments onto the main part of the blog as she's solved a few mysteries for me!! Comments are easily forgotten so I didn't want this one to get lost.
Thanks, Pamela - much appreciated.
Jane

First things first.......Does the difference between a salamander, a lizard and a gecko matter. I guess it matters a heck of a lot to another one!!
So what is the difference, well a gecko IS a lizard. Just a kind of lizard with those extra special sticky pad toes that enable it to climb up a sheet of glass.
But it wont come across a sheet of glass in the wild you may well ask!! Maybe not but I guess it's a pretty useful bit of gear that lets you escape along a shiny banana leaf or up a smooth barked tree when being pursued by a predator.
House geckos that many of you will be familiar with are well adapted for running up walls.

So what's the diff between a lizard and a salamander. Simply put it just that one is higher up the evolutionary scale than the other. When the fishes crawled out of the sea on their adapted fins they evolved into Amphibians (frogs, toads, salamanders) and developed lungs to breathe and legs to walk on. BUT they still need to live near water as they have a moist skin that would dry out and they lay their eggs in or near water and have aquatic young that use gills to breathe.

Reptiles (lizards, crocodiles, snakes, turtles, tortoises) followed them and are truly terrestrial with a dry scaly skin, are fully air breathing and do not need to rely on water although many have secondarily returned to live in it.

So on to Jane's gecko
I LOVE IT, I LOVE IT, I LOVE IT!!!

This is my dream tat gecko, I have been trying to get Jane to design this for me since the first day I was aware of her wonderful talents. I have poked and prodded and tempted her with photos and drawings of geckos until I finally pressed the right button. Have to keep her challenged and on her toes for the sake of the tat world!!

The first thing that comes to mind when I see this gecko in it's present stage (and you will think this strange) is that the design must have been easy because that is exactly what it should look like!!
Maybe this is the highest compliment I can pay her because I know very well that it wasn't easy at all, especially when she challenges me to design one and I don't know where to start!! somehow or other my brain is missing a bit! how I wish I had it!!

Down to the nitty gritty then, the legs are fab, the body is fab, the split rings really give the impression of a back bone and ribcage. The tail is great, partic the fat bit at its base, tail can be modified in length and thickness according to species.
The head is probably the most difficult bit to get right, the drawing is perfect as you have captured the egg shape very well, but the tat head has got more round, lost its slim neck and its more pointy nose. Tho' there are some roundy nosed geckos. Why didn't that diagram work??
Maybe add another ring to lengthen the head.
Don't know how you are going to do the eyes, they are soosh important.
You are so nearly there and my shuttles are raring to go.
Thanks Jane for my gecko.

What is the difference?

Now it occurs to me that I don't know the difference between a salamander, a lizard and a gecko! Does it matter, I ask myself? Yes it does!
My friend sent me a link about six weeks ago to an Etsy shop where there was the most adorable crocheted gecko for sale. I think it was a big hint as her husband acquires real geckos from time to time. Anyway, Pamela (the friend and designer of the alternative meercat head and bent flamingo leg) is the one I really need to ask as she and her hubby are the experts.
I thought about this as a project for a while (well, about ten minutes) and decided to make a start a few days later.
Life has been rough, very rough lately so it's taken me time to start blogging it. This will be a looooong post so get yourself a cup of tea or coffee and sit tight. OR just close this page down!!!
Where to start? Well I decided to start with the tail so this was my first attempt.

First of all the whole thing bends the wrong way - well, not the way I planned!! I'd found a 'model' to follow through Google images and his whole body bent the other way - downwards!! I continued with this sample to try and get a front and back leg done.

Not too bad but at this stage it appeared to me as if it would have to be done in several 'parts'. Meantime I also used my drawing software to 'play' with the whole concept. Here's one of the drawings which you can see has an 'alternative' tail. The head looks good in this drawing but that doesn't mean to say it'll work in 'real tat'!!

I now had to start again as I'd decided that this could be worked in two parts. Same start place but ........
This time, and in order to make the tail and body more stable and 'encourage' it to bend in the way that I wanted, I used the same formula of split rings but added very small picots on the lower sides to join them to each other. This appears to have worked as you can see below. BUT where to go next? Obviously the head and then back down the top side of the body as before.

The head. Hmmm, it needs to be simple. The drawing looked good (above) but when I worked it and re-tatted it several times I didn't like it one bit!! I decided to leave it as it was and continue down the top side of the animal just to see if it would 'improve with keeping'!!! It was also an opportunity to test the written text for the legs. I was still intending to go to the base of the tail and stop.
At this point the plan was to then start again from the nose and make the other side. Then, whilst thinking about this I suddenly realised that by doing it that way it would mean that the tatter would have to do frontside/backside tatting for the block tatted legs to look good!!! I'm not a fan of this type of tatting (needs too much concentration for me) so decided I'd have another think!
Oh, I might add here that I do use frontside/backside if I'm sure the item's not going to be viewed from both sides. In other words if it's going to be sewn or stuck to a base.

A few days later and the 'penny dropped'!!!! Why not an alligator join instead of stopping at the base of the body? Then I could continue up the other side without having to do frontside/backside on the block tatting.
Ah, another problem here! On the first side I used the 'back' of the legs to bring the work from the claws back to the body. On this second side I'll have to use the 'fronts' of the legs. This needs some crafty design work to achieve!!! Can I do it? Am I capable? Hmmmmm. I also need to be sure that the legs are NOT the same as the first pair so that the gecko appears to be moving. Tat should be easy as they are constructed slightly differently!!
Well, here's the latest version. In the second picture I have added 'false' eyes. You will notice that the lower part of the face isn't the same as the upper part!! That's deliberate (cough, cough, splutter, splutter!) as I was trying out a second (and better) idea. I won't be doing any more to this design until Pamela comes back to me with suggestions! Over to you, Pamela!!!!!

Finished!

I was still giggling about Gina's comments on Thursday's post and decided that she was totally right. If worked in white the edging would look like a line of molars! So I thought I'd take another look at the idea again and this is what I've done. I think it looks a lot better - your comments are more than welcome Gina!!! It was rather late yesterday evening when I did the corner and you can see that on the first part I didn't join to the picot on the side at the top. This was deliberate as, although I'd added extra ds to the chain I wasn't sure it would be enough. When I came to start on the next side I did join and can now see that this will work!!!

Off to try and finish some more pages to put on the pattern site. I keep remembering things that are still lying around on the computer and which haven't made it into cyberspace!!!

Corner

OK, Gina, I take your point - it does look like a row of molars!!! Very funny!! That's just reminded me - dentist next week - YIKES!
Yesterday I drew the corner out as I find this is the easiest way for me to work. I just drew a few sections, copied and turned one group at right angles, added another single element for the corner and then remove the parts of the corner piece that are not needed. You can see this here.

In the evening I tried it out and it's perfect. All I have to do now is put the pattern together along with a few others that need finishing!!

Hey, who stole yesterday?

I lost yesterday and didn't get round to updating the edging onto the blog. I'm actually quite pleased with it now. Not sure I like these colours, though!! Very 'un-Jane'!!! They do go with the tshirt that I want to add the piece to so, if I still like it later today I may well continue to the 'bitter end'!!! You can see that replacing the SR with a chain between the 'elements' enables the piece to be used either straight or curved. I started to think about the corner I want to make for it last night but I was so tired I didn't pick a shuttle up yesterday! I may well do a drawing for this as the weather isn't good enough for gardening (good excuse!) and sometimes doing it this way rather than using a right angled mirror is easier for me. I'll let you know!!

Too much

I've tidied up the piece as I said I would yesterday and it looks a lot better, I think. There is more space now but I haven't altered the stitch count at all! The only part that changes is the header which I think (when I get it finished) will be published with the 'alternatives'!
Towards the end of this piece I decided to replace the 'spacer' SR with a chain. I think this will make the finished edging more flexible so that if you want to sew it onto a tshirt (which is my intention) it will 'go with the flow'!

Progress

I did do a bit on the edging last night in spite of not being in the mood. I tried the way of working using a split ring and no continuous join. It's looking a lot neater but I'm now wondering if the two small picots I've put on one of the central SR's really need to be there. I think I'll try it without. The problem with those two is that they may again be 'cluttering' the area just under the SR and I do want a bit more space showing.

This pattern (when it's finished) could have many headers to it and I hope to be able to give those eventually.
I'd also like to give it a corner as I remember seeing edges when I was a teenager that I wanted to work but they didn't have corners! In those days I couldn't get my head round doing them myself!

A few hours later and I've just been down the town to get some milk. Actually I almost walked straight past our new neighbour I was so deep in thought!! Whilst I was wandering along I was thinking about this edging (sad woman, or what!) and it's occurred to me that it might be as well to make the SR in the centre of each section a little wider. I've been using 4 - 4 / 4 - 4 but I think I may now try 6 - 6 / 6 - 6. This would throw the lower section outwards. See where the small SR's are heading to the foot of the edging? Hang on, I'll draw it out

See where the arrows are pointing? That's where I mean to alter it to 6 - 6. This should make a bit more of a space between the lower small SR's and R. Having done this then there may well be more scope for a fancier top!!!! Time will tell!!

Thoughts on designing

I'm about to return to the edging again but really this is due to inspiration given to me by the latest copy of Shuttle to Shuttle. This little magazine is published in order to keep some of the groups in the U.K. in touch with each other. I think it must be like the Palmetto fronds!
Now, the main reason I'm thinking about this today is that inside issue 4, which I received on Thursday, there is a small edging called 'Little Maids all in a Row' by Jennifer Williams. This pretty but simple edging has made me realise yet again where I am going wrong with mine. Mine is too complicated! Typical of me - I can never 'think simple'!!! So I'm going back to look at it again!! This is the one I'm talking about (below).
I'm now using a different 'tactic' on myself by drawing it up in order to make myself think long and hard on what I'm doing. I've already spotted that I don't need to use the CTJ in this particular 'version'. I DO like the lower part of this edging but it's the top that concerns me most. If I now 'space' the parts out a bit it may look better - less cluttered. The problem I can see thanks to the drawing is that the sections might not join to each other easily at the bottom - perhaps a ring on a SR or a chain may help OR AM I GETTING TOO COMPLICATED AGAIN!?!?!?!? Hey, ho, time to give the brain a rest and go out for a walk!!!

Earrings for a friend

I try and I try to make other 'sorts' of earrings but I still go back to this design! These are for a friend but I'm very tempted to keep them!!! I've told her they're ready just so that I'm not tempted to!!! I'll have to make another pair for myself. Oooooh, remembered I've got THE brightest pink beads from ebay so perhaps ANOTHER pair using these might happen. Still working hard on 'secret' stuff but should be back on a new design soon. I feel one 'coming on'!!!

Music notes finished

I made the big clef again yesterday as it rained ALL day. That's always a good excuse to sit and tat!!! I also managed the small clef too which was very easy. Both now written in 'Jane' and although I want to re-press them and attach them to a piece of card for travelling they are about done!!

Musical tatting

Now anybody who knows me knows that there's one thing I don't like and that's music. Apparently this makes me a very odd person!!! OK, I'll go along with that!!! I don't even like background music although I will admit to having been to two Beatle concerts when they were first popular in the 60's!!!

Anyway, this is really beside the point. A friend in the USA wrote the other day to ask me if I would make her up a pattern that she'd bought. It's the music doily by Christel Weidmann. My friend only wants the notes - not the whole doily. If you click on the title then it will take you to a page where the doily pattern is bing sold. You'll have to scroll down a bit!!
I (foolishly???) said yes! Anyway, it's all in German which isn't a big problem as there are some English notes with it and then there's always dear old Babelfish (the online translator) to help too. I sat down yesterday morning and spent a loooonnggg time translating it into 'Jane'!!!
I then tried tatting up my notes and the scan below is how it looks at a first attempt. Of course, me being me I didn't start with the easiest one which is sort of half moon shaped. I think this one is called a Clef but I've no idea what the other one's called!!! I can tell you in German, though!!! The big one (below) is called a Violin-Schlussel and the little one's a Bass-Schlussel!!!! I suppose I could go and translate those in Babelfish but it's much more fun like this!!!
Anyway, below is the first attempt. I think it's only really a matter of tweaking the last part and finishing off the last chain round the last ring. You can see where the threads trail off to the shuttles as bedtime called last night!!! More fun today as I re-tat it with amendments and tweaking and then start on the small one!!!

Bags and motif

I realised after reading all the tatting lists about making bags that I'd never photographed my latest one!!! I made it back in the Winter but then it lay around waiting for me to sew on the bits and bobs! In the end I stuck these on with some fabric glue. You can see my eye, heart, 2 and T A T on this side with some of the 'trial' bead people. This is my 'everyday' bag as I always take it shopping with me - I'm trying to do my bit to save the planet for future generations. I'm hoping one day to add more to it. There are other pieces on the back but they're the patterns I'm taking to Palmetto with me so are still 'top secret'!!!!

I love doing bags and did one to take to Palmetto a few years ago. There's a link to it if you click on the title. You can also click on the pictures on there to see enlargements.

The motif I'm working on 'suffered' a few improvements last night and I've now settled on this as the 'finished' idea!!!! It needs pressing but the ironing board's been out twice this year!!!!

Small motif

I'm making some small motifs to use for presents to take to family. They have to be sewn onto fabric. I'm playing with a 'combination' pattern of several that I've done in the past. Why, oh why can't I just get up off my butt and look in a book (I have well over 100 plus leaflets) instead of putting myself through the agonies of 'making something different'?
Anyway, here is the motif so far but I'm not sure it'll stay this way!!!! The background HAS to be burgundy so it's proving quite hard to find the 'right' colour to use for thread. I may go and play with combinations of fine threads instead of the green. It looks fine in 'real life', though. OR could this be a good excuse to buy more thread for my stash? No, no, no, Jane. Stay away from more thread temptations!!!!!

Ring a Ring earrings!

This is an idea I've been working on and it's SO simple it really doesn't need any more skill than being able to tat rings. Tat's it, really, rings round a ring. I sort of used another pattern which is on my web site but replace parts of it with beads. I'm using this for earrings but another thought has occurred to me which I won't tell about just yet as I need to play first BUT this is just SO easy. Oh, a love of beads is probably a must too!!! Most of these are for a friend but I shall keep the pink and green ones. The photos aren't really showing them off very well but I think you can get the general idea!!!

Another arrival in Tatland!!

Elvis is alive and living in Tatland! Honestly! Just click on the title to find out more!!!
Forgot to mention earlier - listed more tatting stuff on ebay!!! My seller ID is simply janeeborall!!

Nothing to do with tatting!

Friday, good, megga good, exceptionally good, fantastic day.
I had a phone call yesterday evening from my youngest daughter who then put four year old Nathan on the phone. He told me that 'mummy's got a baby in her tummy and it's going to 'pop out' soon'. I can't explain how I feel as I'd been hoping for ages that Nathan would have a sibling to share his parents with. Callum has Oscar and Athena has Carter and finally Nathan will have somebody too!!!
After all those years of teaching I realised way back that it was really good to have more than one child if possible. I'm the oldest of three (one brother and one sister). I know it's not always possible but it's good to have somebody to play with, argue with and, well, just BE with!!!!
I apologise to anybody who thinks that this blog is all tatting - caught you out this time, eh?!?!?!!?
No tatting yesterday and probably not a lot today as the garden took a lot of my time!!!

Time to abandon the edging for a while

Oh dear, oh dear. This is now NOT a good design. I suddenly realised that (as usual) I was being too clever with this edging and so have changed it quite drastically. It occurred to me that the CTJ wasn't actually needed at all!!! How silly is that!! So I tried starting in a different place!! Oh, not a good idea!! That scrap has been duly filed in the bin!! Below is another attempt replacing a ring with a split ring and thus getting rid of the CTJ in one go. BUT I'm not sure I like it now and it certainly needs some 'help' with the swop from the top to the bottom part as it now looks untidy. I find it's a good idea to use strongly contrasting colours when doing this sort of thing as it really, really shows up the problems!!!
I shall now leave it for a while until the 'muse' strikes again!!! I HATE TATTING. Well I did for five or ten minutes!!!!