Now what?

After the excitement of yesterday and my announcement that Heidi now has the book (Dora Young's "All New Knotless Tatting") in her hands I am now 'back to boring' you with my regular posts.  

Yes, I'm still working on the ring 'thing'.  I've had an idea but not sure if it'll work.  This is actually part of it.  


I think it looks like a doomed idea but you never know.  

I'm continuing with the Dora motif I showed you yesterday, too.  I have to have two projects 'on the go' at the same time!!!

GOOD NEWS

Just heard a few minutes ago (when I woke up!) that the Dora Young reprint is now available. 

Heidi sent me this link so you can buy directly from her but she's also sent copies to Handy Hands too although they won't be there for another week or two - depending on the USA mail, I suppose!!!

Funnily I'd just started a new adventure with one of the patterns yesterday as I've been dying to see how it would look in two colours. I may have to start again, though, as I think I've made the picots a bit too big on this.

The reason I started was because I heard a week ago that the book was at the printers and that Heidi would be sending me a copy.  I'll tell you ALL about it when it arrives.  The excitement is intense in my corner of Tat Land and I'll be keeping a close eye open for the postman!!!

Another idea - sort of!

This time I added beads to the chains.  This is an OK sort of idea but it isn't really original at all.  

I'm not happy as I want something more from BC3. Not sure how to progress this but I'm sure it won't stay like this!!!

It's years since I last played with covering cabone rings with tatting and I've done other projects since but I don't think this is end of this year's playtime, I promise!!  

There's something addictive to covering rings with tatting and I find it mesmerising.  I'm easily pleased!!!!

Next part of my story about a ring!

Can you see what I've done with the ¾" ring? 

First I made a motif which fits snugly into the middle of the ring. I added beads to the bottoms of each ring by having them on the thread round the back of my hand when I started each petal. Also, with the canny use of vsp's, I managed to make those darn rings sit sweetly where they should. 

I sometimes think that the folks in Tat Land should christen me the 'Queen of the VSP's' as I use them such a lot!!!!  Mind, they'd have to crown me with a vsc (very small crown)!!!  There again - perhaps nobody's noticed!!!! They are an important design stability element for me. Well, that's my excuse and I'm sticking to it so don't you all throw rotten eggs at me!

The next thing I did was to cover the ring at the same time as adding the flower to the tatting.  

More to come!!!

Pattern now ready

I thought you might like to see all the beaded baubles together in one place. Well if you didn't want to see them you're going to anyway cause they're here!!! I believe in making my blog readers suffer!

Oh, the pattern - nearly forgot. It's here. 

Rings and things

Here is a ring.

That's all I'm saying - it's a ring!!! 

A metal one from the necklace with the oversized beads (now my new Christmas decorations).

I think this is going to be my next  project!!  This size of ring (¾" internal diameter) seems to be pretty standard as I've 'acquired' lots over the years.  

All I've got to do now is pull out BC3 and get him working again.  Just when he thought he was going to have a rest!!!

Finally!

The very, very last one!!!

This time I've used white again but this time with green beads. 

Now to find something new to do. Not sure what I'm going to tackle next but I do know it'll be fun!!!!

The penultimate bead dangle

Now a change of colour again. This is number 7 of the 8 beads that I have of this size. 

White is just lovely and I've chosen gold beads and clear Swarovski crystals for this one. 

I've not had time to do anymore to the pattern for a few days but am hoping to get it done soon. It will include patterns to fit four sizes of beads. Originally I hadn't intended to publish the details as I thought it wouldn't be of any interest. BUT I've had a few comments where people have asked for details so it will get done!!!

Sticking with the green!!

I've also managed to start putting the pattern together so it could well be available for all the different sizes of beads after next weekend. Well if that's if I'm not distracted by other things which are beginning to tempt BC3!!!

Today it's still the green thread but with red beads!!!!

Christmas is coming

And the goos is getting fat. Please put a penny in the old man's hat!!!!

How very stupid to be talking about the 'festive season' when we're not even halfway to the next one. 

I've decided that this year I may actually put these covered beads up as decorations. I never ever get round to putting tatting up anywhere at Christmas. I think we're just two grumpy old gits who can never really be bothered!!! However when I've done all 8 of them they may make a nice decoration. Well, that's the plan at the moment!!!

Here is another one - green thread with green and gold beads.

I've got a BIG, BIG

SECRET. 

Shall I tell you or shall I keep you in suspense? 

AWWWWW, well I'll tell you as long as you DO NOT tell anybody else.  Remember this is a secret.

The Dora Young re-print is at the printer's RIGHT NOW.  I'll give you further information on how you can get it when I hear back from Heidi.  

Now in green!!!

I used same thread as yesterday (mainly because I was too lazy to go and get anything else) but this time I found some green beads.

I forgot to tell you that I had to slightly adjust my stitch count using this thread but it wasn't a problem as it was only on the last row.

I am writing the pattern down as I go but I've got visitors at the moment so tatting has almost stopped!!!!

Another but different

There's just one thread that I really, really love that isn't cotton based. That's the Altin Basak gold (silver and bronze too) metallic. I THINK it's called Nakis Simi but I've long since lost the label!!! I can just tell you that it was stonking good value for money as I've had it for years and years and used it a great deal. It comes in a small cone.

Anyway, that was my next 'target' for the very large beads and you can see it below. Do I love sparkle? YES I DO!!!

Also shown is one of the beads I'm using too.

Double trouble?

This time I've doubled up on the dingly dangly bits and added beads to the chains on two consecutive rows. 

I'm not sure if anybody would want the pattern/patterns for this but I will put it together eventually unless I go off on another idea which often happens!!! 

Although it's really really simple with just a few split rings (Diane!!!) it is a bit fiddly for the last few rings and chains as you have to work with the bead inside the tatting. Well worth it, I think.

Eureka or not

Not sure if this is what I'm going to finally settle on!

This was VERY hard to photograph as it sparkles SO much. On the long beaded picots there are some red sparkly bicone beads which are the 'jam' in a sandwich of size 11 sparkly red beads. 

I have an idea for another one so hold tight and be prepared for more!! Don't worry - you won't get bored as I've only got 7 of the big beads and am trying to resist the temptation of starting on the rings. Ideas are buzzing and BC3 is nagging!!!

Another new start

Remember these beads I've been working with? Well there are three sizes and as we all know - size is critical. Well, almost as tatting does have a bit of 'give' to it.

A neighbour and I went on a 'jolly' to Birmingham a few weeks ago and I mentioned I'd be looking out for more beads in the same sizes. Nothing, zilch, nowt in the market or anywhere else. 

Then Sue happened to be in a nearby town a week or so later and found a necklace with beads and rings which she bought for me from a charity shop. 

The beads turned out to be quite a lot bigger than the ones I'd been playing with so it's back to the 'drawing board' - as 'they' say!!!

Here's a 'pattern' for the beads. I know, it's not very glamorous as it's a test to see if my guess work design fits or not! I'd say it was a good, snug fit! Now to write it down properly and use some 'decent' thread to see what comes of it. I'm thinking Christmas decorations but BC3 may have other ideas!

Found and in need

Found and in need of a new and good home!!!!

As you've probably gathered I've not had a lot of time for tatting or showing you 'stuff' but while doing what I've been doing in the background (MASSIVE clean and tidy) I found this Bocote Pop A Bobbin Shuttle lurking on my worktop by the computer. 

This sad and lonely (and only child) is for sale for $33.69 or £20.00 plus postage. The postage overseas will be roughly £3.15 depending on where in the world the buyer is.

Please email me if you want to give this little guy a good home.  All he needs to keep him happy is lots of thread and (occasionally) a few beads!!!

Now for a better picture!

Not only that but another finished project. This is the t-shirt that I threatened with a tatted edging. It's amazing how different a cheap t-shirt can look with a very simple tatted edging. 

At least this picture does the colour of the garment justice!!!  I know somebody called Diane who will like the colour!!!

Another necklace finished.

I'm really liking playing with the beads so decided to make another necklace which I'll probably never wear. 

Like the last one I've smothered it with Scotchgard but unlike the last one I've added tiny gold beads to the joining picots. 

Not a lot going on

The rest of my life is gradually impinging on my life in Tat Land so I've not got a lot to show and may have little over the next two weeks either.

I have been doing a trim for another new t-shirt and you can see in this picture the rather crumpled item! At the moment I am pinning it on and it needs to be sewn. This is a really bad picture as it was getting dark when I took it. The shirt is actually a very pretty blue. Perhaps I'll get a better photo when it's finished. 

I intend to do the same trimming for the sleeves too.