19 October 2021

This time it's a hat!

This is a hat to go with the pair of gloves I made.  
A year or so ago I made myself a hat but the pattern I used wasn't 'in the round' so had to be stitched up when it was finished.  I tried and tried to find the pattern I used but in the end I gave up.  So I counted the stitches I'd used on my original hat and decided to knit this one to the same size.

I haven't got a circular needle short enough to use so in the end decided to go with double ended ones which I do love using.

A good start has been made as you can see but I still wanted to find a way of making the crown and needed to know how and when to decrease!!!   Finally I found this pattern and it's also got the stitch count for the size I'm knitting!!  Really chuffed about this!!!



15 October 2021

Another project

I haven't shown you this before because.  Well I kept forgetting!!!
I was wandering around Hobbycraft some weeks ago and I spotted these gorgeous colours of yarn (purple, dark green, variegated).  I tried and tried NOT to buy them but in the end I simply had to and that's when I had to make a decision on what to do with them.  

I've decided to make this waistcoat (see below).  The reason for a larger project like this and one that is knitted in rows and not in the round, is to make myself practice continental purl stitch.  Now this isn't as easy as the knit stitch but I'm slowly getting there.  I keep a crochet hook handy for the occasional dropped stitch and this is my progress (after several weeks) so far.  



14 October 2021

After the fingers and thumbs

I have just carried on as I didn't want to bore you all to bits so here are the finished gloves for my daughter.  
I didn't really enjoy them as they were so plain but they're done now.  

Next small 'job' is a hat to go with them.  Now I'm going to tackle two patterns for this.  Last year I knitted a hat for myself but it was one that needed stitching up afterwards.  This time I'm going for avoiding having that seam by using circular needles.  That's if the amount of stitches fit on the circular pin and allow me to go 'round the bend'!!!  No comments there, please as I know I'm already round that bend!!!

These are the two hats that I'm hoping to combine.  First of all this one and then this one.  

I think poor old BC3 is going to drive himself round the bend with all the counting etc!!!











12 October 2021

My pattern site

Well it's been six weeks of worrying about my pattern site.  
You will have noticed that I use 'freeservers' as my web host and I bet a few of you thought 'good old Jane, she's got it for free'!!!   Well that's not the case!!  I pay for my space every two years (this time it's £105.00) and I usually hope to raise that amount from people clicking on adverts on this blog - hint, hint.  Lately that hasn't happened as much as people seem to have migrated to Facebook.

Anyway, I had an email from freeservers about six weeks ago telling me to check my billing status as they were going to take money from my account on October 11th.  Well I checked and horror of horrors the card I'd used two years ago was now obsolete.  No problem, thought BC3, I'll just change it to my new card.  

WRONG.  I got a big red sentence at the top of my page telling me - well you'll see below.  I tried another 12 or 13 times and each time Freeservers appeared to take 72 pence out of my bank account.  Actually that didn't really happen as they turned out to be ghosts and disappeared from ‘pending’ in the account after a few days.  I tried from time to time over the following four weeks and each time I got the same message.  I didn't ring them (too expensive from the UK) but did email but those were only answered once a week and were no help at all.

Finally at the beginning of last week I thought I'd have a final try at updating the billing information again and much to my surprise it appears to have worked. 

Yesterday dawned (11th October - pay Freeservers day) and I got a text from my bank saying that a company was trying to debit an amount of £105 from my account and told me to follow instructions - which I did very carefully as I knew who and what it was.  Blow me down with a feather but my bank saw fit to decline to pay even though I’d told them to.  I rang the bank and am now waiting for Freeservers (remember they don’t answer emails very often) to try again and the lady at my bank who I spoke to said that the payment would go through if requested again.  So if my website disappears then you’ll all know why.  

8:15 this morning and an update to the last paragraph.  PAYMENT HAS FINALLY GONE THROUGH!

Meanwhile I'd decided that the winter would be spent moving the whole caboodle over to another hosting site.  That's probably nearly 400 pages with at LEAST two links per page etc etc.  What a waste of valuable crafting time!!!

Keep your fingers crossed that it’ll all get sorted.  



11 October 2021

Monday moan

Front side/back side tatting.  Is it important or not?  

Personally I don't think it is.  Not at all - BUT I do do it when I think it's going to be for a competition (not that I've entered one for years) or if I'm going to scan a piece for my blog (which I usually do!!).  

As a lot of us give our tatting away then it's probably a good idea to do what I think is the original way of tatting - with disregard to the way it may look.  That's just making the knots the same way on both rings and chains.  

The point is that the receiver of the tatted gift won't know there's a 'right way up' or a 'wrong way up' and when they plonk their doily (or whatever) on a table that won't even occur to them.  So I'm trying to say that it honestly doesn't matter to most people and certainly NOT to those who know little about our craft!!!

I've never seen mention of front/back in any old books or leaflets and I think it's a modern idea.  Well, within the last 20 or so years.

So today's moan isn't really a moan - more a discussion point but I'd love to know what people think.  



7 October 2021

Lots of fingers and a couple of thumbs!!!

Off on another glove adventure!!!  This pair is already spoken for and I hope that they do finally get finished although I keep getting sidetracked by lesson plans!!!  

I’m enjoying my knitting and so, so glad I decided to teach myself the continental way to 'manipulate' the needles.  

I'm missing the variegated yarn, though!!!  I did buy some more variegated from a lady in the market a few weeks ago but I'll probably not use it this winter.  



6 October 2021

Asking questions

First of all I must thank all the Etsy sellers who I contacted over the weekend.  You all graciously answered my query without asking me why I wanted to know the answer.  
The reason for my impromptu research was because a friend had bought a pattern and when she came to print it it was 10 pages long although the actual pattern was on only 2 pages.  

This set me off on my quest to find out the average size of patterns of the same  type and complexity (small coaster/doily size).  The reasoning was because from the 'get go' I've always tried sooooo hard to save on paper and ink when I produce a pattern.  This has and always will be a big factor for me as we're destroying our planet and I want to do a bit to save it.  I do spend a lot of time trying to fit all the instructions on as few pages as possible.  

The most interesting result of my research was the number of designers who hadn't even thought about that side of things as they (like me) mostly work digitally.  I haven't printed off any of my own patterns for many, many years.  Several designers were very surprised to learn that people actually do print but I have quite a lot of friends who like to work from paper just like they also prefer a paper book.

One or two said that they put in a lot of instructions on how to make the pattern too.  Now this is fine for somebody who is just starting on their journey in our craft but for old timers then it's so annoying.  I had a pattern shown to me not long ago and because of the amount of 'help' that was given the actual pattern itself was lost and I honestly couldn't follow it.  It was also in two languages as well.  A great effort on the part of the designer but REALLY confusing to read and follow.  I gave up!!!

Personally I think a pattern of a small coaster/doily size should be at the very most two or three pages long and just stick to giving the instructions to work the design.  I don't see the point of so many pictures or explanations let alone a 'front page' and fancy large fonts.  If you come across something  you don't understand then just ask Mr Google or the designer for help.  Also coloured backgrounds (particularly black) are a real ‘no, no’.

Just my opinion - what do you think?



4 October 2021

Difference between a mock ring & SCMR?

This question is bothering me now.  Over the years the terminology seems to change for tatting abbreviations.  Like the ‘ring on chain (ROCh)’ has now become a TOR (thrown off ring) which I find confusing as I always thought a TOR was a ring thrown off a ring. 
Today I want to discuss the SCMR v MR.  Now this is a technique that the Houtz brothers revived in their book ‘Tatting the GR-8 Self-Closing Mock Ring’ which was published in 1999 although it had been around long before that.  

Now my question at this point in time is what IS the difference between a SCMR and a MR (mock ring)?  OR is there a difference?  Can somebody explain as I’d always ‘assumed’ that a SCMR was a ring thrown off a chain and then joined back again at the start of the chain and that a mock ring was a pretend ‘ring’ like this.

Can some expert ‘out there’ please please explain the difference as I was trying out a new pattern for somebody and the start was a ‘self closing mock ring’ and, of course, I set off but couldn’t see how the ‘ring’ was a thrown off the chain as it didn’t return to the place I’d left at the start either.  So to me that would be simply a mock ring.  I know that people will tell me that a mock ring is a self closing mock ring and vice versa but I personally think there should be a difference.  I know that this technique can be made several ways and one way is something that I’d never considered until discussing this with Judith Connors - that is by using an swirl join or, as it’s sometimes called, an alligator join.  Judith never fails to wake up my brain.  She pointed me to Rhoda Auld’s method on pages 56 & 57 which is really interesting and also to Elgiva Nicholls book too although I must admit I haven’t had time to look at that yet.

It would certainly help a certain OG who is brain challenged to have a positive definition of the differences and then I can take off the technique page on my site which isn’t needed.



1 October 2021

A BRAGGING post

A post which has NOTHING to do with craft work whatsoever although I suppose it could be classed as ‘crafty’!!!
Last weekend the dishwasher died.  It wouldn’t start properly but it did fill with water.  It did get going once but again left a large puddle in the bottom.  Time to get out the destructions (instructions!).  The dishwasher is almost nine years old so there were several options to consider.  Either get the repair man out or get a new machine.  As we only run it about 3 times a week we also talked about whether we really needed another one. 

Then I remembered my lovely friend Joan who takes computers to bits and re-builds them when necessary so I got out my phone, got onto Youtube (just like Joan does) and found a video on how to fix the machine.

Now I’ve always been really good at taking things apart (thanks to my brother who once took MY clockwork train to bits to see how it worked) but I’m not so good at putting them back together!!!  BC3 can never remember where the bits go back!!

Knowing this bad trait of mine I did take it apart carefully although I struggled with the little white ‘cover bit’ that had to come out as it was in an awkward place behind another ‘black bit’.  With the aid of a toothbrush (no, I didn’t steal Nick’s) and after wiggling a little round thing a bit I decided to put it all back together and try it out.  

The result?  Well it’s working better now than it has done for a few years.  There must’ve been something in that little round wiggly thing, I think.  So, £s saved and another thing to add to my list of skills!!!






30 September 2021

Second glove done!

Here it is!!  What you’ve all been waiting for - or not!!!  The second glove done and now they're a pair!

So, what's on the agenda next?  I think another pair of gloves!!!







28 September 2021

Feeling sad

Well it seems that 65 years worth of experience is of no use to some people.  

If you ask for help then PLEASE accept it with graciousness and not bite the hand that's trying to feed you advice.



27 September 2021

Monday moan

Today’s little grumble is about the effort some people seem to think needs to be put into tatting.  By that I mean making a huge mountain out of a mole hill.
I've one to moan about today.  Posting the shuttle before closing a ring.

I tried that idea for several months (posting the shuttle through the ring before closing) and after a while stopped to seriously think about it.  BC3 doesn't 'do' thinking seriously very often.  

So then I tried going back to my old ways (and a LOT faster too) of not bothering and came to a eureka moment when I realised that (for me) it wasn't about posting the shuttle but just about holding the final ds of the ring firmly so it didn't twist.  It also didn't make a BIT of difference to being able open a ring after closing!

A picture to cheer you up after my moan!



23 September 2021

One glove done

Finally got the one glove done.  
You'll be sad to hear that I've ordered more yarn for more gloves so no more tatting to show for a while.  Which doesn't mean that I'm NOT tatting but more that I've nothing to show you as it's all design work which will be submitted for lessons next year.  So far I've only got three done and I really need 6.  I'm working on number four which is causing me some headaches!!!

Back to glove talk - the second of the pair shouldn’t take long as the fingers and thumb are already done.  Watch this space!!!






20 September 2021

Glove progression

After the fingers have been made it's time to join them and start the long journey down the hand.  NOT forgetting the thumb, of course.
As the pinky finger is lower down the hand than the other three fingers you need to work a few rows before joining that one in.  You can see that in this picture.

Also it's easier to change from the original dpn's (double pointed needles) to two circular ones (the same size, of course).  This is weird as you work with them but not in the round.  Actually it's really easy but my first attempt last year was a puzzle!!!  The pattern needs to be read carefully.  I'll give you the link again here.



16 September 2021

I'm so proud

To show you a picture of Judith Connors with her Order of Australia Medal which she received on Tuesday from the Governor. 
Well deserved, Judith - tat on.

Thanks, Ruth, for the photo.  Much appreciated.



15 September 2021

More fingers

There’s something about knitting gloves that is so satisfying - particularly doing them from the fingers down to the cuffs.  

Not sure why that’s so but it might be just ‘me’ who enjoys this challenge.  

Can you see the markers on these fingers?  Joanie gave me those when I last stayed with her in Florida.  They’re so, so useful.  I’ve noted which colour represents which finger in my notes app so that I can keep my BC3 happy!  

These gloves need dpn’s (double pointed needles) and TWO circular needles of the same size.  Well you don’t really need the circular ones but I found it so much easier  to use those for the part below the fingers/thumb when I last knitted gloves using this pattern.

So, onwards and upwards!!!


13 September 2021

Hitting the doldrums

I may be a bit quiet this week.  
Now stop cheering all those reading this post!!!  
The fact is that I’ve got many things in the pipeline that I can’t share with you as they’re not ready and are waiting for Covid to sort itself out!!!  
So whilst on a roll with another design for a teaching project I suddenly decided I simply HAD to knit.  I get these whims from time to time!!!  Gloves are the current project as one of my daughters mentioned she could do with another pair!!!  
A start has been made!!!  These will be fingers to cuffs again as I like the way of working.  Here’s a link.


10 September 2021

Dorset buttons

Well having seen Diane’s Dorset buttons I had to have a go myself.  I remember doing some many years ago but had forgotten how easy they are but how they are quite a problem to get looking good.  Diane’s leading the way with making them while I think that I’ve now given up - at least for many more years!!!



I declare it finished!!!

It's finished with the trimming on the back too!
I took a trip to visit my daughter and family a week or so ago and my son in law took some photos of me wearing the silk top.  I can 'see' this over a black top with black trousers so I may eventually wear it but I'm not sure I'll ever attend an occasion where I can!!!  

If not I'll wear it to scrub the kitchen floor!!!  I'll miss it as it was an enjoyable upcycle.  Now to look in the charity shops for another project.  I'm realising after almost 78 years on this planet that it's not as hard as I thought it would be to mess around with altering clothes.  Mind this was a big alteration from an oversized man's shirt to a wearable top!!!





9 September 2021

Beads assembly continues

The best laid plans of mice and Jane never seem to work out!!!  If you'd have seen the mess I got into with trying to assemble this with the invisible thread you'd have laughed your socks off.  It was so, so frustrating and in the end I gave up.  It was fine (well ish) adding the invisible to the beads and then onto the piece of dowling I found BUT when I picked the wood up the whole thing instantly tangled and it was impossible to sort out!!!  

The air was blue around me as I spent a good few hours trying NOT to give in to the problem but in the end I had to declare it 'NOT a good idea' and abandon it.  Now the problem with invisible thread is that it is truly invisible but when tatted with it does become sort of 'not' invisible and doesn't produce a pretty result.  Well,  not in my opinion.  

This was 'after the invisible' and before another decision was made but more about that later!!!!

Creative Commons Licence

Happy Beaks

Happy Beaks
I beg your pardon? I didn't quite catch what you said.